Key Insights into Assessment Validation and Validating Assessments
Key Insights into Assessment Validation and Validating Assessments
Blog Article
Post-registration, RTOs are tasked with many responsibilities including annual declarations, AVETMISS reporting, and marketing compliance, and validation is often the most challenging.
Even though we've covered validation in depth, let’s revisit its definition. ASQA defines validation as a quality review of the assessment process.
Validation is essentially about verifying the accuracy of parts of an RTO's assessment process and spotting areas needing improvement. Understanding its key components can make it less daunting.
According to Clause 1.8 of the SRTOs 2015, RTOs must ensure their assessment systems, including RPL, comply with the training package requirements and are conducted according to the Principles of Assessment and Rules of Evidence.
The standards require RTOs to perform two types of validation.
The first assessment validation type verifies that your RTO's assessments adhere to the training package requirements within your scope.
The second validation ensures assessments are conducted according to the principles of assessment and rules of evidence.
It suggests that validation takes place before and after the assessment. This article focuses on the first type—assessment tool validation.
The Fundamentals of the Two Types of Assessment Validation
Assessment Validation: An Explanation
As noted earlier and in our earlier blog entries, validation is split into two stages: (1) assessment tool validation and (2) post-assessment validation.
Pre-assessment validation, or assessment tool validation, is concerned with the first part of the clause, which ensures all unit requirements are met and that workbooks are fully compliant.
Post-assessment validation, in contrast, is about ensuring the implementation side, where Registered Training Organisations conduct assessments according to the Principles of Assessment and Rules of Evidence.
In this article, we will emphasize assessment tool validation.
Steps to Perform Assessment Tool Validation
After reviewing the two types of validation, let’s explore the specifics of assessment tool validation.
Timing for Conducting Assessment Tool Validation
The aim of assessment tool validation is to make sure that all elements, performance criteria, and performance and knowledge evidence are included in your assessment tools.
This means that whenever new learning resources are acquired, assessment tool validation must be performed before they are used by students.
You don’t need to wait until your next 5-year validation schedule. Immediately validate new resources to ensure they’re ready for student use.
Nonetheless, there are other reasons to conduct this type of validation. Perform assessment tool validation when you:
- resources are updated by you
- when new training products are added on scope
- your course gets reviewed against training product updates
- your risk assessment includes identifying your learning resources as a risk
The Australian Skills Quality Authority's risk-based approach means RTOs should carry out regular risk assessments. If students complain about learning resources, it's an ideal time for assessment tool validation.
What Training Products Need Validation?
Bear in mind, this validation is meant to ensure all learning resources are compliant before use. All RTOs are required to validate all unit resources.
What Do You Need for Assessment Tool Validation?
Learning Materials
Given that you are conducting assessment tool validation, you will need the full array of your learning resources:
Mapping tool – start with this document. It illustrates which assessment items address unit requirements, making validation quicker.
Learner/student workbook – validate its suitability as an assessment tool. Confirm that instructions are clear and answer fields are sufficient. This is a common problem.
Assessor guide/marking guide – confirm that instructions for assessors are adequate and clear benchmarks for each assessment item are present. Clear benchmarks are crucial for reliable assessment outcomes.
Other related resources – may consist of checklists, registers, and templates created separately from the workbook and marking guide. Validate them to ensure they are appropriate for the assessment task and address unit requirements.
Team for Validation
Clause 1.11 describes the requirements for validation panel members, stating that validation can be conducted by one or more individuals. RTOs often require all trainers and assessors to be present, occasionally including industry experts.
As a whole, your validation panel must have:
Vocational competencies and current industry skills that relate to the unit being validated
Recent knowledge and expertise in vocational teaching and learning
Any of the following training and assessment credentials:
TAE40116 Certificate IV in Training and Assessment or an equivalent successor
Validation instrument/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
Having a validation tool supports the validation process and documentation. It simplifies understanding how each assessment item maps to each unit requirement.
At the same time, it here can serve as your document evidence that you have validated your resources before letting the students use them.
Additionally, it serves as documented proof that you have validated your resources before student use.
Although ASQA does not recommend or require a specific template for assessment tool validation, numerous templates can be found online. These tools typically have validators examine the tools holistically to determine if they meet the principles of assessment.
Principles of Assessment Guide Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable
While templates like these make validation easier, they also allow for judgment errors since there is little room for commenting on each assessment item.
We recommend a more detailed template to inspect each unit requirement and the assessment items that correspond to them. Here is an example:
Element Performance Criteria Instructions for Assessment Benchmarks Assessment Instrument Rectification Recommendations
What do you Need to Check?
What Needs Checking?
As we explained in our blog post Common Problems In Assessment Tools, it’s vital that your assessment tools enable trainers to follow assessment principles and evidence rules.
Assessment Core Principles
Fairness – Does the assessment ensure equal opportunity and access for everyone?
Flexibility – Does the assessment offer multiple ways to show competence according to different needs and preferences?
Validity – Does the assessment test what it is meant to test? Is it a valid tool for assessing the required skill or knowledge?
Reliability – Will the assessment yield the same results every time, no matter who conducts the training? Will different assessors make the same decision on skill competence?
Evidence Rules
Validity – Is the evidence demonstrating that the candidate has the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is the evidence enough to ensure the learner has the required skills and knowledge?
Authenticity – Does the assessment tool ensure that the work is the candidate’s own?
Currency – Are the assessment tools based on current units of competency and up-to-date industry practices?
Even though these are often covered in VET professional development and nationally recognised training, many tools still struggle with these requirements.
To prevent using learning resources that overlook some unit requirements, make sure to follow these guidelines:
Live Up to Your Words
Pay attention to the verbs in the unit requirements and ensure they are addressed by the assessment item. For example, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement asks students to:
Perform each of the following activities at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication according to service and regulatory requirements:
nappy change
bottle preparation, bottle-feeding infants, and cleaning equipment
prepare solid food and feed infants
respond to baby signs and cues appropriately
prepare babies for sleep and settle them
monitor and foster age-appropriate physical exploration and gross motor skills
Having students describe changing nappies for babies under 12 months doesn’t directly fulfill the unit requirement. Unless it’s intended to assess underpinning knowledge (i.e., knowledge evidence), students should be doing the tasks.
Keep an Eye on Plurals!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Notice the numbers. In the CHCECE032 example, one unit requirement asks students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby doesn’t meet the requirement.
Full or Not Competent
Pay attention to lists. As mentioned earlier, if students perform only half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Provide More Detail
Every assessment item must include clear and specific benchmark answers to guide the assessor’s judgment on student competence. Consequently, ensure your instructions are clear and not confusing for students or assessors. For example:
What kind of information can be included in a work package?
What details can be included in a work package?
Answers might include:
Compulsory resources
Appropriate costs
Time allocated for activities
Designated roles and responsibilities
If an assessment item demands multiple answers, specify the number of answers required from a student. This ensures your assessment is reliable, and the evidence obtained is valid.
The same applies to assessment items with double-barrelled questions or those that ask for multiple answers simultaneously. Such questions can confuse both students and assessors, as illustrated in the example below:
Identify a hazard and/or environmental issue in the work area and pick the most effective hazard control hierarchy.
Answers can include, but are not limited to:
Weather conditions – isolation of work area, engineering, PPE
Work area and ground conditions – elimination, isolation, engineering controls
People – isolation, engineering controls, administrative controls
Structural hazards – substitution, isolating, engineering controls
Chemical hazards – isolation, engineering controls, administrative controls
Equipment or machinery – isolation, engineering controls, administration
Avoiding double-barrelled questions simplifies responses for students and allows assessors to judge competence accurately.
Given these requirements, you might wonder, “Don’t learning resource developers provide audit guarantees?” However, these guarantees require waiting for an audit to rectify noncompliance. This impacts your compliance history, so it’s better to take a safe and compliant route.